Creating Rate-Limit Profiles

This chapter provides information for configuring rate-limit policy management on E-series routers. For information on monitoring rate-limit profiles, see Monitoring Rate-Limit Profiles

This chapter discusses the following topics:

• Rate Limits for Interfaces Overview
• Hierarchical Rate Limits Overview
• Percent-Based Rates for Rate-Limit Profiles Overview
• Policy Parameter Quick Configuration
• Creating Rate-Limit Profiles
• One-Rate Rate-Limit Profiles Overview
• Creating a One-Rate Rate-Limit Profile
• Configuring a TCP-Friendly One-Rate Rate-Limit Profile
• Two-Rate Rate-Limits Overview
• Creating a Two-Rate Rate-Limit Profile
• Setting the Committed Action for a Rate-Limit Profile
• Setting the Committed Burst for a Rate-Limit Profile
• Setting the Committed Rate for a Rate-Limit Profile
• Setting the Conformed Action for a Rate-Limit Profile
• Setting the Exceeded Action for a Rate-Limit Profile
• Setting the Excess Burst for a Rate-Limit Profile
• Setting the Mask Value for MPLS Rate-Limit Profiles
• Setting the Mask Value for IP and IPv6 Rate-Limit Profiles
• Setting the Peak Burst for Two-Rate Rate-Limit Profiles
• Setting the Peak Rate for Rate-Limit Profiles
• Setting a One-Rate Rate-Limit Profile
• Setting a Two-Rate Rate-Limit-Profile
• Bandwidth Management Overview
• Rate-Limiting Traffic Flows