[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

snmp-server enable traps

Syntax

To enable and configure trap severity level on a global basis:

[ no ] snmp-server enable traps [ trapCategory | snmp authentication ]
[ trapfilters trapFilter ]

To specify the trap severity level on a per-category basis:

snmp-server enable traps { trapCategory | snmp authentication } per-category-trapFilters trapFilter

Release Information

Command introduced before JUNOSe Release 7.1.0.
ip keyword added in JUNOSe Release 7.1.0.
packetMirror keyword added in JUNOSe Release 7.2.0.
per-category-trapFilters keyword added in JUNOSe Release 9.3.0.

Description

Enables and configures global and category-level SNMP trap generation. The no version disables SNMP trap generation globally. There is no no version for the command to specify the trap severity level on a per-category basis.

Options

trapCategory—SNMP trap category
- addrPool—Local address pool traps
- atmPing—E-series router proprietary ATM ping traps
- bfdmib—BFD MIB traps
- bgp—BGP state change traps
- bulkstats—Bulkstats file full and nearly full traps
- cliSecurityAlert—Security alerts traps
- dhcp—DHCP traps
- dismanEvent—Distributed management (disman) event traps
- dosProtectionPlatform—DoS protection platform traps
- dvmrp—DVMRP traps
- dvmrpProp—E-series router proprietary DVMRP traps
- environment—Power, temperature, fan, and memory utilization traps
- fileXfer—File transfer status change traps
- haRedundancy—High availability and redundancy traps
- inventory—Router inventory and status traps
- ip—Internet Protocol traps
- ldp—LDP traps
- link—SNMP linkUp and linkDown traps
- log—System log capacity traps
- mobileIpv4—Mobile IPv4 traps
- mplste—Mplste traps
- mrouter—Mrouter traps
- ntp—E-series router proprietary traps
- ospf—OSPF traps
- packetMirror—Secure packet mirroring traps; visible only if packet mirroring is enabled
- pim—PIM traps
- ping—Ping operation traps (in disman remops MIB)
- radius—RADIUS authentication and authorization servers
- routeTable—Maximum route limit and warning threshold traps; when this trap is generated, the actual value of the exceeded warning threshold is displayed
- sonet—SONET traps
- snmp—SNMP coldStart, warmStart, link, and authenticationFailure traps
- traceroute—Traceroute operation traps (in disman remops MIB)
- vrrp—VRRP traps
snmp—Specifies the SNMP coldStart, warmStart, and authenticationFailure traps
authentication—Specifies the SNMP authenticationFailure trap
trapFilters—Specifies the trap severity level at a global level; if the per-category trap severity level is not set for a particular category, this setting is applied to that category
trapFilter—Minimum severity level for filtering traps at a global level or for a specified category
- emergency—Severity level 0
- alert—Severity level 1
- critical—Severity level 2
- error—Severity level 3
- warning—Severity level 4
- notice—Severity level 5
- informational—Severity level 6
- debug—Severity level 7
per-category-trapFilters—Specifies the trap severity level for a particular category; this setting overrides the severity level set at the global level for this category
trapFilter—Minimum severity level for filtering traps for the specified category

Mode