show ip rpf-route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ] [ all ] [ protocol ] [ filter ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Displays routes that the router can use to verify
source addresses in multicast packets.
Options
vrfName—Displays the contents
of the IP routing table associated with a VRF
destination—Specifies the
IP address or domain name of the host to show
ipMask—IP mask of the specific
address to show
detail—Displays detailed information about the specific
prefix; currently shows the tag added by means of the ip route command
all—Displays all routes in the routing table inserted
from all protocols (not just the best routes
that are used for forwarding)
protocol—One of the following
protocols for which you want to display the best routes in the routing
table; no routes are displayed if routes for the specified protocol
are not present in the routing table
access—Displays the best access-server routes (BGP)
in the routing table
access-internal—Displays the best access-internal
routes in the routing table
bgp—Displays the best BGP routes in the routing
table
bgp-tunnel—Displays the best BGP tunnel routes in
the routing table
dvmrp—Displays the best DVMRP routes in the routing
table
isis—Displays the best IS-IS routes in the routing
table
ldp—Displays the best LDP tunnel routes in the routing
table
local—Displays the best locally connected routes
in the routing table
mbgp—Displays the best MBGP routes in the routing
table
ospf—Displays the best OSPF routes owned by in the
routing table
other—Displays the best internal control routes
in the routing table
rip—Displays the best RIP routes in the routing
table
rsvp—Displays the best RSVP tunnel routes in the
routing table
static—Displays the best static routes added by
network management to the routing table
static-rpf—Displays the best static RPF routes added
by network management to the routing table
