Command introduced before JUNOSe
Release 7.1.0. route-target signaling keywords added in JUNOSe Release 8.2.0.
Description
Displays information about IPv6 BGP
routes whose AS path matches the specified regular expression. Regular
expressions match numbers for which the specified path is a substring—for
example, if you specify 20, 200 matches because 20 is a substring of 200. You can disallow substring matching by using the
underscore (_) metacharacter to constrain
matching to the specified pattern; for example, _20_. You can use output filtering on the display.
Options
unicast—Specifies the IPv6 unicast address family
and routing table; the default option
multicast—Specifies the IPv6 multicast address family
and routing table
vpnv6 all—Specifies the VPN-IPv6 address family
and all IPv6 VPN routing and forwarding instances
vpn6 vrf vrfName—Specifies
the VPN-IPv6 address family and only the IPv6 VPN routing and forwarding
instance with the name vrfName
route-target signaling—Specifies the route-target
address family
quote-regexp—Indicates that only a single element
is matched
fields—Displays only the specified fields; the display
order of the fields is hard-coded and not affected by the order in
which you enter them
fieldOptions—Fields to be
displayed, in the format all | [ afi | aggregator |
as-path | atomic-aggregate | best | clusters | communities | extended-communities
| imported | intro | in-label | loc-pref | med | next-hop | next-hop-cost
| origin | originator-id | out-label | peer | peer-type | rd | safi
| stale | unknown-types | weight ]*
all—All available information; not recommended,
because this information for each network does not fit on a single
line and is difficult to read
afi—Address family identifier
aggregator—AS number and IP address of aggregator
as-path—AS path through which this route bas been
advertised
atomic-aggregate—Whether the atomic aggregate attribute
is present
best—Whether this is the best route for the prefix
clusters—List of cluster IDs through which the route
has been advertised
communities—Community number associated with the
route
extended-communities—Extended community
imported—Whether the route was imported
intro—Introductory information about the state of
various BGP attributes; this information is displayed only if you
specify this keyword
in-label—MPLS label for the route; the label received
with incoming MPLS frames; typically, but not always, this is the
label advertised to MP-BGP peers
loc-pref—Local preference for the route
med—Multiexit discriminator for the route
next-hop—IP address of the next router that is used
when forwarding a packet to the destination network
next-hop-cost—Whether the indirect next hop of the
route is unreachable, if not, displays IGP cost to the indirect next
hop
origin—Origin of the route
originator-id—Router ID of the router in the local
AS that originated the route
out-label—MPLS label for the route; the label sent
with outgoing MPLS frames; also the label received from MP-BGP peer;
typically, but not always, this is the label received from MP-BGP
peers
peer—IP address of BGP peer from which route was
learned
peer-type—Type of BGP peer: internal, external,
or confederation
rd—Route distinguisher
safi—Subsequent address family identifier
stale—Route that has gone stale due to peer restart
unknown-types—Attribute codes for unknown path attributes
weight—Weight of the route
*—Indicates that one or more parameters can be repeated
multiple times in a list in the command line
