[ no ] redistribute isis ip { level-1 into level-2 |
level-2 into level-1 } { distribute-list accessListName | route-map mapTag }
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Redistributes routes from one IS-IS routing level
into the other. You must specify either an IP access list or a route
map to define the IS-IS routes to be redistributed. The no version ends the redistribution.
Options
level-1—Specifies the redistribution of routes
from or into IS-IS level 1
level-2—Specifies the redistribution of routes from
or into IS-IS level 2
accessListName—String of up
to 32 alphanumeric characters specifying the IP access list used to
filter routes between levels
mapTag—String of up to 32
alphanumeric characters specifying the route map applied to all routes
from the source protocol; if you do not specify a route map, all routes
are redistributed
