no path pathChannel ds3 ds3Channel t1 t1Channel fdl transmit
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Configures the router to send the specified type
of FDL message for a T1 channel on a DS3 signal. This command applies
to a T1 channel on a DS3 over channelized SONET interface. The no version stops the router from sending the specified
type of FDL message or all FDL messages.
Options
pathChannel—Number, in the
range 1–2147483648, that identifies the path
ds3Channel—Number, in the
range 1–3, that identifies the DS3 channel
t1Channel—One or more individual
T1 channels, ranges of T1 channels, or combination of individual channels
and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27
path-id—Transmits a path identification message
every second; default value is disabled
idle-signal—Transmits an idle signal message every
second; default value is disabled
test-signal—Transmits a test signal message every
second; default value is disabled
