no path pathChannel ds3 ds3Channel t1 t1Channel fdl string { eic | fic | lic |
unit | pfi | port | generator }
Release Information
Command introduced before JUNOSe
Release 7.1.0.
Description
Defines an FDL message for a T1 channel
on a DS3 signal, as defined in the ANSI T1.403 specification. This
command applies to a T1 channel on a DS3 over channelized SONET interface.
Currently, FDL strings can only be configured locally. The no version restores the default value to the specified
FDL message or to all FDL messages.
Options
pathChannel—Number, in the
range 1–2147483648, that identifies the path
ds3Channel—Number, in the
range 1–3, that identifies the DS3 channel
t1Channel—One or more individual
T1 channels, ranges of T1 channels, or combination of individual channels
and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27
eicValue—Equipment identification
code; 1–10 characters; default value is the null value
ficValue—Frame identification
code; 1–10 characters; default value is the null value
licValue—Line identification
code; 1–10 characters; default value is the null value
unitValue—Unit identification
code; 1–6 characters; default value is the null value
pfiValue—Facility identification
code to send in the FDL path message; 1–38 characters; default
value is the null value
portValue—Equipment port number
to send in the FDL idle signal message; 1–38 characters; default
value is the null value
generatorValue—Generator number
to send in the FDL test signal message; 1–38 characters; default
value is the null value
