[ no ] path pathChannel ds1 tributaryIdentifier remote-loopback
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Enables acceptance of remote loopback requests
at the DS1/E1 over SONET/SDH VT layer on channelized SONET and SDH
interfaces. The no version restores the
factory default value, which is to reject remote loopback requests.
Options
pathChannel—Number, in the
range 1–2147483648, that identifies the path
tributaryIdentifier—Specifier
for the tributary in the format pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
pathPayload—Payload number
for the path; value is 1 for SONET and in the range 1–3 for
SDH
tributaryGroup—Number, in
the range 1–7, that identifies the group within the path
tributaryNumber—Number of
the tributary within the tributary group; the value is in the range
1–4 if the tributary type is vt15 or tu11 and in the range 1–3
if the tributary type is tu12
