path pathChannel ds1 tributaryIdentifier fdl { ansi | att | all | none }
no path pathChannel ds1 tributaryIdentifier fdl [ ansi | att | all ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Specifies the FDL standard for a DS1 signal when
DS1 is configured over a channelized SONET or SDH interface. The no version restores the default, none.
Options
pathChannel—Number, in the
range 1–2147483648, that identifies the path
tributaryIdentifier—Specifier
for the tributary in the format pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
pathPayload—Payload number
for the path; value is 1 for SONET and in the range 1–3 for
SDH
tributaryGroup—Number, in
the range 1–7, that identifies the group within the path
tributaryNumber—Number of
the tributary within the tributary group; the value is in the range
1–4 if the tributary type is vt15 or tu11 and in the range 1–3
if the tributary type is tu12
ansi—Specifies ANSI T1.403 Standard for extended
superframe FDL exchange support
att—Specifies AT&T Technical Reference 54016
for extended superframe FDL exchange support
all—Specifies both the AT&T and ANSI mode for
extended superframe FDL exchange support
