no path pathChannel ds1 tributaryIdentifier fdl transmit
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Configures the router to send the specified FDL
message on a DS1 signal. This command applies to a DS1 over channelized
SONET or SDH interface. The no version
stops the router from sending the specified FDL message or all FDL
messages.
Options
pathChannel—Number, in the
range 1–2147483648, that identifies the path
tributaryIdentifier—Specifier
for the tributary in the format pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
pathPayload—Payload number
for the path; value is 1 for SONET and in the range 1–3 for
SDH
tributaryGroup—Number, in
the range 1–7, that identifies the group within the path
tributaryNumber—Number of
the tributary within the tributary group; the value is in the range
1–4 if the tributary type is vt15 or tu11 and in the range 1–3
if the tributary type is tu12
path-id—Transmits a path identification message
every second; default value is disabled
idle-signal—Transmits an idle signal message every
second; default value is disabled
test-signal—Transmits a test signal message every
second; default value is disabled
