no path pathChannel ds1 tributaryIdentifier fdl string { eic | fic | lic | unit | pfi | port | generator }
Release Information
Command introduced before JUNOSe
Release 7.1.0.
Description
Defines an FDL message for a DS1 signal,
as defined in the ANSI T1.403 specification. This command applies
to a DS1 over channelized SONET or SDH interface. Currently, FDL strings
can only be configured locally. The no version
restores the default value to the specified FDL message or to all
FDL messages.
Options
pathChannel—Number, in the
range 1–2147483648, that identifies the path
tributaryIdentifier—Specifier
for the tributary in the format pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
pathPayload—Payload number
for the path; value is 1 for SONET and in the range 1–3 for
SDH
tributaryGroup—Number, in
the range 1–7, that identifies the group within the path
tributaryNumber—Number of
the tributary within the tributary group; the value is in the range
1–4 if the tributary type is vt15 or tu11 and in the range 1–3
if the tributary type is tu12
eicValue—Equipment identification
code; 1–10 characters; default value is the null value
ficValue—Frame identification
code; 1–10 characters; default value is the null value
licValue—Line identification
code; 1–10 characters; default value is the null value
unitValue—Unit identification
code; 1–6 characters; default value is the null value.
pfiValue—Facility identification
code to send in the FDL path message; 1–38 characters; default
value is the null value
portValue—Equipment port number
to send in the FDL idle signal message; 1–38 characters; default
value is the null value
generatorValue—Generator number
to send in the FDL test signal message; 1–38 characters; default
value is the null value
