[ no ] path pathChannel ds1 tributaryIdentifier fdl carrier
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Specifies that a DS1 signal is used in the carrier
environment. This command applies to a DS1 over channelized SONET
or SDH interface. The no version restores
the default situation, in which an interface does not operate in the
carrier environment.
Options
pathChannel—Number, in the
range 1–2147483648, that identifies the path
tributaryIdentifier—Specifier
for the tributary in the format pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
pathPayload—Payload number
for the path; value is 1 for SONET and in the range 1–3 for
SDH
tributaryGroup—Number, in
the range 1–7, that identifies the group within the path
tributaryNumber—Number of
the tributary within the tributary group; the value is in the range
1–4 if the tributary type is vt15 or tu11 and in the range 1–3
if the tributary type is tu12
