Assigns a text description or an alias to a DS1
or an E1 signal. This command applies to a DS1/E1 over SONET/SDH VT
layer on channelized SONET and SDH interfaces. Use the show controllers sonet command to display the text description. The no version removes the description or alias.
Options
pathChannel—Number, in the
range 1–2147483648, that identifies the path
tributaryIdentifier—Specifier
for the tributary in the format pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
pathPayload—Payload number
for the path; value is 1 for SONET and in the range 1–3 for
SDH
tributaryGroup—Number, in
the range 1–7, that identifies the group within the path
tributaryNumber—Number of
the tributary within the tributary group; the value is in the range
1–4 if the tributary type is vt15 or tu11 and in the range 1–3
if the tributary type is tu12
tributaryType—Virtual tributary
type
vt15—Default for SONET DS1 tributaries
tu11—Default for SDH DS1 tributaries
tu12—Default for SDH E1 tributaries
name—Text string or alias
of up to 80 characters for the T1/E1 over SONET/SDH VT layer on channelized
SONET and SDH interfaces
