Command introduced before JUNOSe Release
7.1.0. ipv6Address variable added
in JUNOSe Release 8.0.0.
Description
When used from Router Configuration mode without
specifying an IP address, creates a BGP peer group. The no version removes a peer group.
When used from Router Configuration mode with an IP address
or from Address Family Configuration mode, configures a BGP neighbor
to be a member of a peer group. The no version
removes a neighbor from a peer group.
Note:
You cannot mix IPv4 and IPv6 peer members in a peer group.
Only one type peer is allowed, IPv4 or IPv6. For example, the following
error is generated if an IPv6 peer group member is added to a peer
group that already has IPv4 members; that is, where the peer-group
type is IPv4:
host1(config-router)#neighbor 1::1 peer-group hamburg
% Unable to set 'peer-group' for address family ipv4:unicast for peer 1::1 in core (IPv6 peer cannot be member of a peer-group of type IPv4)
Options
peerGroupName—Name of BGP
peer group
ipAddress—IP address of the
BGP neighbor that belongs to the peer group specified by the name
ipv6Address—IPv6 address of
the BGP neighbor that belongs to the peer group specified by the name
peerGroupName—Name of the
BGP peer group to which this neighbor belongs
Mode
Address Family Configuration, Router Configuration
