neighbor { ipAddress | ipv6Address | peerGroupName } distribute-list accessListName { in | out }
no neighbor { ipAddress | ipv6Address | peerGroupName } distribute-list [ accessListName ] { in | out }
Release Information
Command introduced before JUNOSe Release
7.1.0. ipv6Address variable added
in JUNOSe Release 8.0.0.
Description
Distributes BGP neighbor information as specified
in an access list. The no version removes
an entry.
Using distribute lists is one of several ways to filter BGP
advertisements. You can also use route maps or use AS-path filters,
as with the ip as-path access-list Global
Configuration command and the neighbor filter-list command.
Options
ipAddress—IP address of BGP
neighbor
ipv6Address—IPv6 address of
BGP neighbor
peerGroupName—Name of a BGP
peer group. If you specify a BGP peer group by using the peerGroupName argument, all the members of the peer group
inherit the characteristic configured with this command, unless it
is overridden for a specific peer.
accessListName—String of up
to 32 alphanumeric characters identifying an access list
in—Applies list to incoming routes (inbound policy)
out—Applies list to outgoing routes (outbound policy);
you cannot configure a member of a peer group to override the inherited
peer group characteristic for outbound policy
Mode
Address Family Configuration, Router Configuration
