mdl transmit

Syntax

[ no ] mdl transmit { path-id | idle-signal | test signal }

no mdl transmit

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Transmits an MDL message from a T3 interface. The no version disables transmission of the specified MDL message or all MDL messages.

Options

• path-id—Transmits a path identification message every second; default value is disabled
• idle-signal—Transmits an idle signal message every second; default value is disabled
• test-signal—Transmits a test signal message every second; default value is disabled

Mode

Controller Configuration