debug ipv6 pim { pimLog [ severity { severityValue | severityNumber } ] [ verbosity verbosityLevel ] | switchStategroupAddresssourceAddress | dense-mode {
on | off } | sparse-mode { on | off | sg-state [ group groupAddress [ source sourceAddress ] | rp rpAddress ] [ count ] } }
no debug ipv6 pim pimLog
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Shows information about the selected variable.
The no version disables the display.
Options
pimLog—PIM log of interest;
one of the following options:
autoRp-rcvd—Auto-RP packets received
autoRP-sent—Auto-RP packets sent
engineering—PIM engineering
hellos-rcvd—PIM hello messages received
hellos-sent—PIM hello messages sent
packets—PIM packets received and sent
packets-rcvd—PIM packets received
packets-sent—PIM packets sent
severity—Specifies the minimum severity of the log
messages displayed for the selected category; described either by
a descriptive term—severityValue—or
by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the
priority:
emergency or 0—System unusable
alert or 1—Immediate action
needed
critical or 2—Critical condition
exists
error or 3—Error condition
warning or 4—Warning condition
notice or 5—Normal but significant
condition
info or 6—Informational message
debug or 7—Debug message
verbosityLevel—Verbosity of
the log category's messages; can be any of the following:
low—Terse
medium—Moderate detail
high—Verbose
switchState—Switches from
one type of tree to another
rpt-switch—Switch from a shortest-path tree to a
shared path tree
spt-switch—Switch from a shared-path tree to a shortest
path tree
groupAddress—IPv6 address
of the multicast group
sourceAddress—IPv6 address
of the multicast source
on—Turns on the specified PIM mode on all virtual
routers
off—Turns off the specified PIM mode on all virtual
routers
sg-state—Displays information about the relationship
between a source, multicast group, and RP router
rp—Displays information about the relationships
between sources, groups, and the specified RP router
rpAddress—Address of the RP
router
count—Displays one of the following
(with no optional keywords) number of relationships between
a source, multicast group, and RP router
(with the group keyword) number
of sources associated with the multicast group for PIM sparse mode
(with the source and group keywords) number of source-group pairs for PIM
sparse mode
(with the rp keyword) number
of source-group pairs associated with the RP router for PIM sparse
mode
