Command introduced before JUNOSe Release
7.1.0. l2vpn keyword added
in JUNOSe Release 7.1.0. ipv6Address variable added in JUNOSe Release 8.0.0. route-target signaling keywords added in JUNOSe Release
8.2.0. all, vpls, and vpws keywords
and vplsName and vpwsName variables added in JUNOSe Release 9.3.0.
Description
Brings down the underlying TCP connection and then
brings it back up again, causing both peers to resend their complete
BGP routing table, but clears the specified peer from the set of peers
for which BGP is waiting to receive an End-of-RIB marker after a peer
restart. Hard clearing a peer has the same effect for that peer. There
is no no version.
Options
ipAddress—IP address of identified
BGP neighbor to clear
ipv6Address—IPv6 address of
identified BGP neighbor to clear
peerGroupName—Name of a BGP
peer group to clear
*—Clears all connections
vrfName—Name of a virtual
routing and forwarding instance to clear
ipv4 unicast—Clears the IPv4 unicast routing table;
the default option
ipv4 multicast—Clears the IPv4
multicast routing table
vpnv4 unicast—Clears the VPNv4
unicast routing and forwarding table
l2vpn all—Clears the L2VPN reachability information
for all VPLS and VPWS instances in the L2VPN address family
l2vpn vpls vplsName—Clears
the L2VPN reachability information for the VPLS instance with the
name vplsName
l2vpn vpws vpwsName—Clears
the L2VPN reachability information for the VPWS instance with the
name vpwsName
route-target signaling—Clears the route-target membership
information
Mode
Privileged Exec
Related Topics
Clearing BGP Attributes for L2VPNs and Clearing BGP Attributes for VPLS in the JUNOSe BGP and MPLS Configuration Guide
