Command introduced before JUNOSe Release
7.1.0. l2vpn keyword added
in JUNOSe Release 7.1.0. vpls keyword and vplsName variable added in JUNOSe
Release 7.1.0. all, vpws, and route-target signaling keywords and rtMemNlri and vpwsName variables added in JUNOSe Release 8.2.0. rtMemNlri variable replaced by two variables, rtfAddress and rtfPrefix, in JUNOSe
Release 9.1.0.
Description
Clears IP route flap dampening information and
reinstates the suppressed routes. The dampening keyword and the flap-statistics keyword
both have the same effect. There is no no version.
Options
route-target signaling—Clears the route-target
membership information
rtfPrefix—Prefix representing
the route-target membership NLRI (RT-MEM-NLRI), in the format asNumber:extendedCommunity/prefixLength (for
example, 320:320:524/36) where:
asNumber—AS number for origin
of route target information, in the range 1–4294967295
extendedCommunity—Two-part
number in the format number1:number2 that identifies an extended community of VPNs, in the format number1:number2, where:
number1—Autonomous system
(AS) number, in the range 1–4294967295, or an IP address
number2—Unique integer, in
the range 1–4294967295; 32 bits if number1 is a 16-bit AS number; 16 bits if number1 is an IP address or a 32-bit AS number
prefixLength—Number that specifies
the length of the route prefix, in the range 32–96
rtfAddress—rtfPrefix with a prefix length of 96; representing the route-target membership
NLRI (RT-MEM-NLRI), in the format asNumber:extendedCommunity (for example,
320:320:524 or 320:50.2.3.4:524)
vrfName—Name of a virtual
routing and forwarding instance to clear
ipv4 unicast—Clears the IPv4 unicast routing table;
the default option
ipv4 multicast—Clears the IPv4
multicast routing table
vpnv4 unicast—Clears the VPNv4
unicast routing and forwarding table
l2vpn all—Clears the L2VPN reachability information
for all VPLS and VPWS instances in the L2VPN address family
l2vpn vpls vplsName—Clears
the L2VPN reachability information for the VPLS instance with the
name vplsName
l2vpn vpws vpwsName—Clears
the L2VPN reachability information for the VPWS instance with the
name vpwsName
ipAddress—IP address of the
BGP neighbor to clear
addressMask—Address mask to
be applied to the network IP address
Mode
Privileged Exec
Related Topics
Clearing BGP Attributes for L2VPNs and Clearing BGP Attributes for VPLS in the JUNOSe BGP and MPLS Configuration Guide
