Command introduced before JUNOSe Release
7.1.0. route-target signaling keywords and rtMemNlri variable added in JUNOSe
Release 8.2.0. rtMemNlri variable
replaced by two variables, rtfAddress and rtfPrefix, in JUNOSe Release 9.1.0.
Description
Clears IPv6-specific BGP route flap dampening information
and reinstates the suppressed routes. If the ipv6Prefix option is not used, clears the entire IPv6 BGP routing table. The dampening keyword and the flap-statistics keyword both have the same effect. There is no no version.
Options
route-target signaling—Clears the route-target
membership information
rtfPrefix—Prefix representing
the route-target membership NLRI (RT-MEM-NLRI), in the format asNumber:extendedCommunity/prefixLength (for
example, 320:320:524/36) where:
asNumber—AS number for origin
of route target information, in the range 1–4294967295
extendedCommunity—Two-part
number in the format number1:number2 that identifies an extended community of VPNs, in the format number1:number2, where:
number1—Autonomous system
(AS) number, in the range 1–4294967295, or an IP address
number2—Unique integer, in
the range 1–4294967295; 32 bits if number1 is a 16-bit AS number; 16 bits if number1 is an IP address or a 32-bit AS number
prefixLength—Number that specifies
the length of the route prefix, in the range 32–96
rtfAddress—rtfPrefix with a prefix length of 96; representing the route-target membership
NLRI (RT-MEM-NLRI), in the format asNumber:extendedCommunity (for example,
320:320:524 or 320:50.2.3.4:524)
vrfName—Name of a virtual
routing and forwarding instance to clear
unicast—Clears the unicast routing table; the default
option
multicast—Clears the multicast
routing table
vpnv6—Clears the VPNv6 unicast
routing and forwarding table
ipv6Prefix—IPv6 network for
which to clear dampening information
