LSP Event
Update Encoding Type
Sample Output
user@host> show mpls lsp extensive
Ingress LSP: 1 sessions
10.255.255.40
From: 10.255.255.35, State: Up, ActiveRoute: 0, LSPname: gmpls-lsp1
Bidirectional
ActivePath: path-lsp1 (primary)
LoadBalance: Random
Signal type: STM-1
Encoding type: SDH/SONET, Switching type: Fiber, GPID: PPP
*Primary path-lsp1 State: Up
Bandwidth: 155.52Mbps
Computed ERO (S [L] denotes strict [loose] hops): (CSPF metric: 2)
10.35.100.1 S 10.35.150.1 S 10.35.200.1 S
Received RRO:
10.35.100.1 10.35.150.1 10.35.200.1
7 Nov 7 15:47:11 Selected as active path
6 Nov 7 15:47:11 Record Route: 10.35.100.1 10.35.150.1 10.35.200.1
5 Nov 7 15:47:11 Up
4 Nov 7 15:47:11 Update LSP Encoding Type
3 Nov 7 15:47:11 Originate Call
2 Nov 7 15:47:11 CSPF: computation result accepted
1 Nov 7 15:46:41 CSPF failed: no route toward 10.255.255.40
Created: Thu Nov 7 15:46:38 2002
Total 1 displayed, Up 1, Down 0
Meaning
This LSP event indicates that the encoding type was updated based on the traffic engineering link selected as the first hop.
Cause
This LSP event occurs when the encoding type is not configured on a non-packet LSP. In this case, the encoding type is derived from the traffic engineering link that was selected as the first hop.
Action
Not available.
