[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

MPLS GMPLS Events

Problem

This table provides the links and commands for Generalized Multiprotocol Label Switching (GMPLS) error events that might occur in the output of the show mpls lsp extensive command. Descriptions typically include sample output of the label-switched path (LSP) event, an explanation of what the event means, the possible cause of the event, and any possible actions that you can take. (See Table 11.)

Solution

Table 11: GMPLS Events

Understanding GMPLS Events Tasks

Possible Action or Command
Displaying GMPLS Events

show mpls lsp extensive
  1. RSVP Error, Subcode 7, Signal Type Does Not Match Link Encoding Event

Make sure that the configured bandwidth and the encoding type of the traffic engineering link match in the LSP configuration.

  1. RSVP Error, Subcode 8, Tspec Invalid for Encoding/Switching Type Requested Event

Not available.
  1. Unacceptable Label Value Event

Not available
  1. Unsupported Encoding Type Event

Not available.
  1. Unsupported Switching Type Event

Not available.
  1. Update LSP Encoding Type Event

Not available.
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]