 |
Note: Request for manual autobandwidth adjustment is a feature introduced in JUNOS software Release 7.0. |
Manual autobandwidth adjustment is used on the active LSP path when you wish to trigger an autobandwidth adjustment before the next specified automatic bandwidth adjustment.
|
Note: Request for manual autobandwidth adjustment is a feature introduced in JUNOS software Release 7.0. |
To manually trigger a bandwidth allocation adjustment, use the request mpls lsp adjust-autobandwidth command. You can trigger the command for all affected LSPs on the router, or you can specify a particular LSP. Once you execute the request mpls lsp adjust-autobandwidth command, the automatic bandwidth adjustment validation process is triggered. If all the criteria for adjustment are met, the LSP's active path bandwidth is adjusted to the set bandwidth value determined during the validation process.
For more information on configuring autobandwidth, see the JUNOS MPLS Applications Configuration Guide.
Autobandwidth success and failure is logged in the output of the show mpls lsp extensive command. The following manual autobandwidth adjustment events are included in this section:
