[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

MPLS Autobandwidth Events

This table provides links and commands for working with autobandwidth events that occur in the output of the show mpls lsp extensive command, including sample output of the label-switched path (LSP) event, an explanation of what the event means, the possible cause of the event, and any specific actions that you can take to remedy the situation.

Table 9 provides commands for understanding autobandwidth events.

Table 9: MPLS Autobandwidth Events

Understanding Autobandwidth Events Tasks

Possible Action or Command
Displaying Autobandwidth Events

show mpls lsp extensive
Manual Autobandwidth Adjustment  
  1. Manual Autobandwidth Adjustment Failed Event

Take the corrective action appropriate to the situation:

  • Verify the MPLS and RSVP configurations on all available paths to the LSP endpoint.
  • Check available bandwidth on alternate paths using the show rsvp interface command.
  1. Manual Autobandwidth Adjustment Succeeded Event

Not applicable.
Automatic Autobandwidth Adjustment  
  1. Automatic Autobandwidth Adjustment Failed Event

Take action appropriate to the situation:

  • Verify the MPLS and RSVP configurations on all available paths to the LSP endpoint.
  • Check available bandwidth on alternate paths using the show rsvp interface command.
  1. Automatic Autobandwidth Adjustment Succeeded Event

Not applicable.
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]