Persistent interface error statistics indicate that you need to open a case with JTAC.
To check the local interface for error statistics, use the following JUNOS CLI operational mode command:
user@host# show interfaces so-2/2/0
extensivePhysical interface: so-2/2/0, Enabled, Physical link is Up [...Output truncated...] Statistics last cleared: 2002-04-24 10:39:40 EDT (00:13:26 ago) Traffic statistics: Input bytes : 169686 0 bps Output bytes : 179802 0 bps Input packets: 2101 0 pps Output packets: 2102 0 pps Input errors: Errors: 0, Drops: 0, Framing errors: 0, Runts: 0, Giants: 0, Bucket drops: 0, Policed discards: 0, L3 incompletes: 0, L2 channel errors: 0, L2 mismatch timeouts: 0, HS link CRC errors: 0,HS link FIFO overflows: 0 Output errors: Carrier transitions: 0, Errors: 0, Drops: 0, Aged packets: 0, HS link FIFO underflows: 0 SONET alarms : None SONET defects : None SONET PHY: Seconds Count State PLL Lock 0 0 OK PHY Light 0 0 OK SONET section: BIP-B1 0 0 SEF 0 0 OK LOS 0 0 OK LOF 0 0 OK ES-S 0 SES-S 0 SEFS-S 0 SONET line: BIP-B2 0 0 REI-L 0 0 RDI-L 0 0 OK AIS-L 0 0 OK BERR-SF 0 0 OK BERR-SD 0 0 OK ES-L 0 SES-L 0 UAS-L 0 ES-LFE 0 SES-LFE 0 UAS-LFE 0 SONET path: BIP-B3 0 0 REI-P 0 0 LOP-P 0 0 OK AIS-P 0 0 OK RDI-P 0 0 OK UNEQ-P 0 0 OK PLM-P 0 0 OK ES-P 0 SES-P 0 UAS-P 0 ES-PFE 0 SES-PFE 0 UAS-PFE 0 [...Output truncated...]
Meaning
Check for any error statistics that may appear in the section, line, and path areas of the output. There should not be any input or output errors. If there are any persistent input or output errors, open a case with JTAC at support@juniper.net, or at 1-888-314-JTAC (within the United States) or 1-408-745-9500 (from outside the United States).
