For Ethernet TCC circuits, include the encapsulation ethernet-tcc statement. This statement configures the encapsulation for the entire physical interface.
To provide Address Resolution Protocol (ARP) functionality for an Ethernet-based neighbor, configure the remote statement at the [edit interfaces interface-name unit unit-number family tcc] hierarchy level and specify either the MAC address or IP address of the TCC router’s Ethernet neighbor. To complete the setup of ARP, configure the proxy statement at the [edit interfaces interface-name unit unit-number family tcc] hierarchy level and specify the IP address of the TCC router’s non-Ethernet neighbor.
- [edit]
- interfaces
- EthernetType-fpc/pic/port {
- encapsulation ethernet-tcc;
-
- unit 0 {
-
- family tcc {
-
- remote { # Addresses associated with the Ethernet TCC neighbor.
- mac-address mac-address;
# Select a MAC or IP address.
- inet-address inet-address;
- }
-
- proxy { # Addresses belonging to the non-Ethernet TCC neighbor.
- inet-address inet-address;
- }
- }
- }
- }
