[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Establishing GMPLS LSP Path Information

When you configure LSP paths for GMPLS, you must use the TE link remote address as your next-hop address. When CSPF is supported, you can use any path option you wish. However, when CSPF is disabled with the no-cspf statement at the [edit protocols mpls label-switched-path lsp-name] hierarchy level, you must use strict paths.


            
               [edit] 
               protocols {
               
                  
                     mpls {
                     
                        
                           path path-name {
                           
                                            next-hop-address (strict | loose);               
                           
                           }
                        
                     
                     }
                  
               
               }

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]