Technical Documentation

show poe controller

Syntax

show poe controller
<detail | summary>

Release Information

Command introduced in JUNOS Release 9.0 for EX-series switches.

Description

Display the status of the Power over Ethernet (PoE) software module controller.

Options

none — Display general parameters of the PoE software module controller.

detail | summary — (Optional) Display the specified level of output.

Required Privilege Level

view

List of Sample Output

show poe controller

Output Fields

Table 1 lists the output fields for the show poe controller command. Output fields are listed in the approximate order in which they appear.

Table 1: show poe controller Output Fields

Field Name

Field Description

Ctrl-index

Identifies the controller.

Max-power

Specifies the maximum power that can be provided by the switch to PoE ports.

power-consumption

Specifies the total amount of power being used by the PoE ports, as measured by the specified telemetries settings.

Guard-band

Specifies the amount of power that has been placed in reserve.

Management

Specifies the management mode. Static is the only management mode supported.

Sample Output

show poe controller

user@host> show poe controller 
Ctrl-index  Max-power power-consumption  Guard-band  Management
    0       305 W       0W                15W         Static

Updated: 2009-04-02