- [edit chassis fpc slot-number pic number tunnel-services]
Statement introduced in JUNOS Release 8.2.
On the MX-series Ethernet Services routers only, specify the amount of bandwidth to reserve for tunnel services.
1g—Specify a bandwidth of 1 Gbps on the Packet Forwarding Engine connected to a Gigabit Ethernet 40-port Dense Port Concentrator (DPC).
10g—Specify a bandwidth of 10 Gbps on the Packet Forwarding Engine connected to 10-Gigabit Ethernet 4-port DPC.
Note: If you specify a bandwidth that is not compatible with the type of DPC and Packet Forwarding Engine, tunnel services are not activated. For example, you cannot specify a bandwidth of 1 GPS for a Packet Forwarding Engine on a 10-Gigabit Ethernet 4-port DPC.
See Configuring the JUNOS Software to Support Tunnel Interfaces on MX-Series Ethernet Services Routers.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.