set chassis cluster node 0 cluster-id 1
set chassis cluster node 1 cluster-id 1 reboot
The command syntax should be as follows:
set chassis cluster cluster-id 1 node 0
set chassis cluster cluster-id 1 node 1 reboot
Syntax—show security alg sip transactions<node (node-id | all | local | primary)>
Release information—Command modified in Release 9.2 of JUNOS software; node options added in Release 9.0 of JUNOS software.
Description—Display information about Session Initiation Protocol (SIP) Application Layer Gateway (ALG) transactions.
This command is supported on J-series and SRX-series devices.
Options
Note the following correct information:
/var/log, not /var/dbThere is no documentation describing the J-Web pages for stateless firewall filters. To find these pages in J-Web, go to Configuration>Firewall Filters, then select IPv4 Firewall Filters or IPv6 Firewall Filters. After configuring filters, select Assign to Interfaces to assign your configured filters to interfaces.
The J2300, J4300, and J6300 Services Router Getting Started Guide incorrectly states that 1000Base-LH SFP (JX-SFP-1GE-LH) is not supported. This SFP is supported.
The following guide contains incorrect screen configuration instructions: