Technical Documentation

Configuring a RIP Network (J-Web Procedure)

J-Web allows you to create RIP networks.

To configure a RIP network:

  1. In the J-Web user interface, select Configure> Routing > RIP Routing.
  2. Enter information into the Configuration page for RIP, as described in Table 1.
  3. To apply the configuration, click Apply.

Table 1: RIP Routing Configuration Summary

Field

Function

Your Action
RIP 

Enable RIP

Enables or disables RIP.
  • To enable RIP, select the check box.
  • To disable RIP, clear the check box.

Advertise Default Route

Advertises the default route using RIPv2.
  • To advertise the default route using RIPv2, select the check box.
  • To disable the default route advertisement, clear the check box.

RIP-Enabled Interfaces

Designates one or more interfaces on which RIP is enabled.

The first time you configure RIP, the Logical Interfaces box displays a list of all the logical interfaces configured on the switch. Do any of the following:

  • To enable RIP on an interface, click the interface name to highlight it, and click the left arrow to add the interface to the RIP interfaces list.
  • To enable RIP on multiple interfaces at once, press Ctrl while you click multiple interface names to highlight them. Then click the left arrow to add the interfaces to the RIP interfaces list.
  • To disable RIP on one or more interfaces, highlight the interface or interfaces in the RIP interfaces box and click the right arrow to move them back to the Logical Interfaces list.