Unsupported CLI Statements and Commands in JUNOS Software Release 9.3 for SRX-series Services Gateways

On an SRX-series device, the show chassis command, does not support the pem option. [PR/296111]
On an SRX-series device, the flow statement does not support the early ageout feature. [PR/301176]
On an SRX-series device, the policy-option statement does not support the level, multicast-scope, dvmrp, esis, isis, l2circuit, l2vpn, ldp, msdp, ospf3, pim, ripng, rsvp, lsp-next-hop, and non-lsp-next-hop options. [PR/304324]
On an SRX-series device, the set class-of-service routing-instances abc classifiers command does not support the exp option. [PR/305353]
On an SRX-series device, the CLI does not support ah, egp, asp, gre, pim, rtarget, tunnel, rsvp, label-switched-path, ccc, dvrmp, esis, isis, l2circuit, l2vpn, ldp, mpls, msdp, ospf3, pim, ripng, and rsvp. [PR/305862]
On an SRX-series device, the forwarding table filter is not supported. [PR/306854]
On SRX-series devices, the set class-of-service and show class-of-service commands do not support the fragmentation-maps option. [PR/309209]
On SRX-series devices, the class-of-service configuration does not support ieee-802.1ad. [PR/310006]
On SRX-series devices, the show command does not support the oam, dot1x, subscribers, link-management, and vpls options. [PR/313099]
On SRX-series devices, the set protocols/show protocols statement does not support the dot1x, ilmi, 12iw, lacp, link-management, neighbor-discovery, route-target, l2vpn, msdp, mvpn, ospf3, ripng, vrf, no-vrf-advertise, provider-tunnel, route-distinguisher, vrf-export, vrf-import, vrf-table-label, vrf-target, fate-sharing, dynamic-tunnels, ipv6, label-switched-path, ah, egp, asp, gre, pim, andrsvp and options. Also, igmp-snooping, l2vpn, ldp, and router-discovery are not supported under the set routing-instances abc protocols. [PR/388468]
On SRX-series devices, the class-of-service feature does not support the interface-set option. [PR/391365]
On SRX-series devices, the l2iw and multicast-snooping-options commands are not supported. [PR/396456]
On SRX 5600 and SRX 5800 devices, the set security authentication-key-chains command is not supported. [PR/398127]

Unsupported CLI Statements and Commands in JUNOS Software Release 9.3 for SRX-series Services Gateways

Related Documentation