TechLibrary

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    lcc-mode

    Syntax

    lcc-mode {lcc lcc_number{mode mode;}}

    Hierarchy Level

    [edit chassis]

    Release Information

    Statement introduced in Junos OS Release 13.1 for TX Matrix Plus routers with 3D SIBs.

    Description

    Set the line-card chassis (LCC) in a routing matrix to function as a T1600 router or a T4000 router. If you set the value of the mode variable as empty, then the line-card chassis goes offline. If the mode statement is not configured, then by default the LCC functions as a T1600 router.

    Default

    If you do not include the lcc-mode statement, the LCC functions as a T1600 router.

    Options

    lcc number

    On a TX Matrix Plus router, display hardware information for a specified router (line-card chassis) that is connected to the TX Matrix Plus router.

    Replace number with the following values depending on the LCC configuration:

    • 0 through 3, when T640 routers are connected to a TX Matrix router in a routing matrix.
    • 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a routing matrix.
    • 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.
    • 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.
    mode mode

    Configure the LCC to function as a T1600 or a T4000 router. The value of the mode variable can be set as t1600, t4000, or empty.

    Required Privilege Level

    interface-control

    Modified: 2016-06-24