TechLibrary

Navigation Back up to About Overview

lcc-mode

Syntax

lcc-mode {lcc lcc_number{mode mode;}}

Hierarchy Level

[edit chassis]

Release Information

Statement introduced in Junos OS Release 13.1 for TX Matrix Plus routers with 3D SIBs.

Description

Set the line-card chassis (LCC) in a routing matrix to function as a T1600 router or a T4000 router. If you set the value of the mode variable as empty, then the line-card chassis goes offline. If the mode statement is not configured, then by default the LCC functions as a T1600 router.

Default

If you do not include the lcc-mode statement, the LCC functions as a T1600 router.

Options

lcc number

On a TX Matrix Plus router, display hardware information for a specified router (line-card chassis) that is connected to the TX Matrix Plus router.

Replace number with the following values depending on the LCC configuration:

  • 0 through 3, when T640 routers are connected to a TX Matrix router in a routing matrix.
  • 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a routing matrix.
  • 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.
  • 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.
mode mode

Configure the LCC to function as a T1600 or a T4000 router. The value of the mode variable can be set as t1600, t4000, or empty.

Required Privilege Level

interface-control

Published: 2014-09-20