Technical Documentation
New
Related Documentation
- M Series
- Configuring PPPoE (for static interfaces)
- Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces
- MX Series
- Configuring PPPoE (for static interfaces)
- Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces
- Assigning a Service Name Table to a PPPoE Underlying Interface
pppoe-underlying-options (Static and Dynamic Subscribers)
Syntax
pppoe-underlying-options {access-concentrator name;dynamic-profile profile-name;duplicate-protection;max-sessions number;max-sessions-vsa-ignore;service-name-table table-name;short-cycle-protection <lockout-time-min minimum-seconds lockout-time-max maximum-seconds>;}
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 10.0.
Description
Configure PPPoE-specific interface properties for the underlying interface on which the router creates a static or dynamic PPPoE logical interface. The underlying interface must be configured with PPPoE (ppp-over-ether) encapsulation.
The remaining statements are explained separately.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- M Series
- Configuring PPPoE (for static interfaces)
- Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces
- MX Series
- Configuring PPPoE (for static interfaces)
- Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces
- Assigning a Service Name Table to a PPPoE Underlying Interface
Published: 2012-03-08
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
