Technical Documentation
New
Related Documentation
- Additional Information
- For information about static IP demux interfaces, see the Junos OS Network Interfaces Configuration Guide
family (Dynamic Demux Interface)
Syntax
family family {access-concentrator name;address address;demux-source {source-address;}duplicate-protection;dynamic-profile profile-name;filter {input filter-name;output filter-name;}mac-validate (loose | strict);max-sessions number;max-sessions-vsa-ignore;service-name-table table-name;short-cycle-protection <lockout-time-min minimum-seconds lockout-time-max maximum-seconds>;unnumbered-address interface-name <preferred-source-address address>;}
Hierarchy Level
[edit dynamic-profiles profile-name interfaces demux0 unit logical-unit-number]
Release Information
Statement introduced in Junos OS Release 9.3.
Option pppoe introduced in Junos OS Release 11.2.
Description
Configure protocol family information for the logical interface.
 | Note:
Not all subordinate stanzas are available to every protocol
family. See the Junos OS Configuration Statements and Commands |
for details about
each protocol family.Options
family—Protocol family:
- inet—Internet Protocol version 4 suite
- inet6—Internet Protocol version 6 suite
- pppoe—(MX Series routers with Trio MPCs only) Point-to-Point Protocol over Ethernet
The remaining statements are explained separately.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- Additional Information
- For information about static IP demux interfaces, see the Junos OS Network Interfaces Configuration Guide
Published: 2012-03-08
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
