Technical Documentation
New
Related Documentation
- M Series
- Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces
- Configuring Lockout of PPPoE Subscriber Sessions
- MX Series
- Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces
- Configuring the PPPoE Family for an Underlying Interface
- Configuring Lockout of PPPoE Subscriber Sessions
- Additional Information
- For information about creating static PPPoE interfaces, see the Junos OS Network Interfaces Configuration Guide
duplicate-protection (Dynamic PPPoE)
Syntax
duplicate-protection;
Hierarchy Level
[edit dynamic-profiles profile-name interfaces demux0 unit logical-unit-number family pppoe],[edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number family pppoe],[edit interfaces interface-name unit logical-unit-numberfamily pppoe],[edit interfaces interface-name unit logical-unit-number pppoe-underlying-options],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family pppoe],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number pppoe-underlying-options]
Release Information
Statement introduced in Junos OS Release 10.1.
Support for the [edit ... family pppoe] hierarchies introduced in Junos OS Release 11.2.
Description
Prevent the activation of another dynamic PPPoE logical interface on the same underlying interface when a dynamic PPPoE logical interface for a client with the same media access control (MAC) address is already active on that interface. Duplicate protection is disabled by default. Enabling duplicate protection has no effect on dynamic PPPoE logical interfaces that are already active.
 | Note: The [edit ... family pppoe] hierarchies are supported only on MX Series routers with Trio MPCs. |
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- M Series
- Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces
- Configuring Lockout of PPPoE Subscriber Sessions
- MX Series
- Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces
- Configuring the PPPoE Family for an Underlying Interface
- Configuring Lockout of PPPoE Subscriber Sessions
- Additional Information
- For information about creating static PPPoE interfaces, see the Junos OS Network Interfaces Configuration Guide
Published: 2012-03-08
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
