Technical Documentation
New
Related Documentation
connectivity-fault-management
Syntax
connectivity-fault-management {action-profile profile-name {default-actions {interface-down;}event {adjacency-loss;interface-status-tlv (down | lower-layer-down);port-status-tlv blocked;rdi;}}performance-monitoring {delegate-server-processing;hardware-assisted-timestamping;sla-iterator-profiles {profile-name {disable;calculation-weight {delay delay-weight;delay-variation delay-variation-weight;}cycle-time milliseconds;iteration-period connections;measurement-type (loss | statistical-frame-loss | two-way-delay);}}}linktrace {age (30m | 10m | 1m | 30s | 10s);path-database-size path-database-size;}maintenance-domain domain-name {bridge-domain <vlan-id [ vlan-ids ]>;instance routing-instance-name;interface interface-name;level number;name-format (character-string | none | dns | mac+2oct);maintenance-association ma-name {protect-maintenance-association protect-ma-name;remote-maintenance-association remote-ma-name;short-name-format (character-string | vlan | 2octet | rfc-2685-vpn-id);continuity-check {convey-loss-threshold;hold-interval minutes;interface-status-tlv;interval (10m | 10s | 1m | 1s| 100ms);loss-threshold number;port-status-tlv;}mep mep-id {auto-discovery;direction (up | down);interface interface-name (protect | working);lowest-priority-defect (all-defects | err-xcon | mac-rem-err-xcon | no-defect | rem-err-xcon
| xcon );priority number;remote-mep mep-id {action-profile profile-name;sla-iterator-profile profile-name {data-tlv-size size;iteration-count count-value;priority priority-value;}}}}virtual-switch routing-instance-name {bridge-domain name <vlan-ids [ vlan-ids ]>;}}}
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 8.4.
Description
For Ethernet interfaces on M7i and M10i routers with Enchanced
CFEB (CFEB-E), and on M120, M320, MX Series, and T Series routers,
specify connectivity fault management for IEEE 802.1ag Operation,
Administration, and Management (OAM) support.
In Junos OS Release 9.3 and later, this statement is also
supported on aggregated Ethernet interfaces.
The remaining statements are explained separately.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
Published: 2012-03-14
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
