advisory-options (ANCP)

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 11.4.

Description

Specify a recommended shaping rate to be applied to downstream or upstream traffic on an interface. For ANCP interfaces, these configured rates are used as the default values for the Juniper VSAs Downstream-Calculated-QoS-Rate (26–141) and Upstream-Calculated-QoS-Rate (26-142) if the router has not received and processed the attributes from the access node. For L2TP, the rates are configured on an underlying PPPoE logical interface for a subscriber on an MX Series router acting as a LAC. When the subscriber is tunneled, these speeds are sent to the LNS in the ICCN message as AVP 24 (downstream) and AVP 38 (upstream), respectively.

Options

downstream-rate—Specify the downstream traffic rate.

upstream-rate—Specify the upstream traffic rate.

rate—Traffic rate in bits per second.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.