Technical Documentation
New
show esis adjacency
Syntax
Release Information
Command introduced before Junos OS Release 7.4.
Description
(J Series routers only) Display End System-to-Intermediate System (ES-IS) adjacencies.
Options
none | — | (Same as brief) Display all ES-IS adjacencies. |
brief | detail | extensive | — | (Optional) Display the specified level of output. |
esis-neighbor-id | — | (Optional) Display adjacencies for the specified neighbor's network service access point (NSAP) only. |
instance instance-name | — | (Optional) Display adjacencies for the specified routing instance only. |
interface interface-name | — | (Optional) Display adjacencies for the specified interface only. |
Required Privilege Level
view
List of Sample Output
show esis adjacencyshow esis adjacency brief
show esis adjacency detail
show esis adjacency extensive
Output Fields
Table 1 describes the output fields for the show esis adjacency command. Output fields are listed in the approximate order in which they appear.
Table 1: show esis adjacency Output Fields
Field Name | Field Description | Level of Output |
|---|---|---|
Nbr Type | Type of network service access point (NSAP) of this neighbor. | brief none |
NSAP/NET | NSAP of this neighbor. | All levels |
Type | Type of NSAP of this neighbor. | detail extensive |
Hold (secs) | Holdtime interval advertised by this neighbor. | brief none |
Interface | Interface through which the neighbor is reachable. | All levels |
Advertised holdtime | Holdtime interval advertised by this neighbor. | detail extensive |
Expires in | How long until the adjacency expires, in seconds. | detail extensive |
SNPA | Subnetwork point of attachment (MAC address of the neighbor). | detail extensive |
Transition log | List of recent transitions.
| extensive |
Sample Output
show esis adjacency
user@host> show esis adjacencyNbr NSAP/NET Hold Interface Type (secs) IS 47.0005.80ff.f800.0000.0108.0001.0102.5501.6008 135 fe-0/0/0.0
show esis adjacency brief
The output for the show esis adjacency brief command is identical to that for the show esis adjacency command. For sample output, see show esis adjacency.
show esis adjacency detail
user@host> show esis adjacency detailNSAP/NET: 47.0005.80ff.f800.0000.0108.0001.0102.5501.6008, Type: IS Interface: fe-0/0/0.0, Advertised hold time: 180 secs, Expires in: 173 secs SNPA: 0:5:85:c1:73:71
show esis adjacency extensive
user@host> show esis adjacency extensive NSAP/NET: 47.0005.80ff.f800.0000.0108.0001.0102.5501.6008, Type: IS Interface: fe-0/0/0.0, Advertised hold time: 180 secs, Expires in: 167 secs SNPA: 0:5:85:c1:73:71 Transition log: When State Event Down reason Sun Nov 26 22:07:35 Up Received ISH
