Technical Documentation
New
Related Documentation
- M Series
- IEEE 802.3ah OAM Link-Fault Management Overview
- Configuring IEEE 802.3ah OAM Link-Fault Management
- Enabling IEEE 802.3ah OAM Support
- Configuring Link Discovery
- Configuring the OAM PDU Interval
- Configuring the OAM PDU Threshold
- Configuring Threshold Values for Local Fault Events on an Interface
- Disabling the Sending of Link Event TLVs
- Detecting Remote Faults
- Configuring an OAM Action Profile
- Specifying the Actions to Be Taken for Link-Fault Management Events
- Monitoring the Loss of Link Adjacency
- Monitoring Protocol Status
- Configuring Threshold Values for Fault Events in an Action Profile
- Applying an Action Profile
- Setting a Remote Interface into Loopback Mode
- MX Series
- link-fault-management
- IEEE 802.3ah OAM Link-Fault Management Overview
- Configuring IEEE 802.3ah OAM Link-Fault Management
- Enabling IEEE 802.3ah OAM Support
- Configuring Link Discovery
- Configuring the OAM PDU Interval
- Configuring the OAM PDU Threshold
- Configuring Threshold Values for Local Fault Events on an Interface
- Disabling the Sending of Link Event TLVs
- Detecting Remote Faults
- Configuring an OAM Action Profile
- Specifying the Actions to Be Taken for Link-Fault Management Events
- Monitoring the Loss of Link Adjacency
- Monitoring Protocol Status
- Configuring Threshold Values for Fault Events in an Action Profile
- Applying an Action Profile
- Setting a Remote Interface into Loopback Mode
- Enabling Remote Loopback Support on the Local Interface
- Additional Information
- Junos OS Ethernet Interfaces Configuration Guide
Example: Configuring IEEE 802.3ah OAM Support on an Interface
Configure 802.3ah OAM support on an MX Series 10-Gigabit Ethernet interface:
[edit]protocols {oam {ethernet {link-fault-management {interface xe-0/0/0 {link-discovery active;pdu-interval 800;pdu-threshold 4;remote-loopback;negotiation-options {allow-remote-loopback;}event-thresholds {frame-error 30;frame-period 50;frame-period summary 40;symbol-period 20;}}}}}}
Related Documentation
- M Series
- IEEE 802.3ah OAM Link-Fault Management Overview
- Configuring IEEE 802.3ah OAM Link-Fault Management
- Enabling IEEE 802.3ah OAM Support
- Configuring Link Discovery
- Configuring the OAM PDU Interval
- Configuring the OAM PDU Threshold
- Configuring Threshold Values for Local Fault Events on an Interface
- Disabling the Sending of Link Event TLVs
- Detecting Remote Faults
- Configuring an OAM Action Profile
- Specifying the Actions to Be Taken for Link-Fault Management Events
- Monitoring the Loss of Link Adjacency
- Monitoring Protocol Status
- Configuring Threshold Values for Fault Events in an Action Profile
- Applying an Action Profile
- Setting a Remote Interface into Loopback Mode
- MX Series
- link-fault-management
- IEEE 802.3ah OAM Link-Fault Management Overview
- Configuring IEEE 802.3ah OAM Link-Fault Management
- Enabling IEEE 802.3ah OAM Support
- Configuring Link Discovery
- Configuring the OAM PDU Interval
- Configuring the OAM PDU Threshold
- Configuring Threshold Values for Local Fault Events on an Interface
- Disabling the Sending of Link Event TLVs
- Detecting Remote Faults
- Configuring an OAM Action Profile
- Specifying the Actions to Be Taken for Link-Fault Management Events
- Monitoring the Loss of Link Adjacency
- Monitoring Protocol Status
- Configuring Threshold Values for Fault Events in an Action Profile
- Applying an Action Profile
- Setting a Remote Interface into Loopback Mode
- Enabling Remote Loopback Support on the Local Interface
- Additional Information
- Junos OS Ethernet Interfaces Configuration Guide
Published: 2012-02-28
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
