Technical Documentation
New
Example: Configuring a CCC over Frame Relay Encapsulated Interface
Configure a full-duplex Layer 2 switching circuit cross-connect between Router A and Router C, using a Juniper Networks router, Router B, as the virtual switch. See the topology in Figure 1.
Figure 1: Example Topology of a Switching Circuit Cross-Connect with Frame Relay CCC Encapsulation
[edit]interfaces {so-1/0/0 {encapsulation frame-relay-ccc;unit 1 {point-to-point;eui-64 frame-relay-ccc;dlci 600;}}so-2/0/0 {encapsulation frame-relay-ccc;unit 2 {point-to-point;encapsulation frame-relay-ccc;dlci 750;}}}protocols {connections {interface-switch router-a-router-c {interface so-1/0/0.1;interface so-2/0/0.2;}}mpls {interface all;}}
Published: 2012-02-29
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
