Technical Documentation
New
Related Documentation
- J Series
- Configuring NAT Rules
- M Series
- Configuring NAT Rules
- MX Series
- Configuring NAT Rules
- T Series
- Configuring NAT Rules
rule
Syntax
rule rule-name {match-direction (input | output);term term-name {from {application-sets set-name;applications [ application-names ];destination-address (address | any-unicast) <except>;destination-address-range low minimum-value high maximum-value <except>;source-address (address | any-unicast) <except>;source-address-range low minimum-value high maximum-value <except>;}then {no-translation;translated {address-pooling paired;destination-pool nat-pool-name; destination-prefix destination-prefix; destination-prefix;dns-alg-pool dns-alg-pool;dns-alg-prefix dns-alg-prefix;filtering-type endpoint-independent;mapping-type endpoint-independent;overload-pool overload-pool;overload-prefix overload-prefix;source-pool nat-pool-name;source-prefix source-prefix;translation-type (basic-nat-pt | basic-nat44 | basic-nat66 | dnat-44 | dynamic-nat44
| napt-44 | napt-66 | napt-pt | stateful-nat64 | twice-basic-nat-44
| twice-dynamic-nat-44 | twice-napt-44);}}syslog;}}}
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Description
Specify the rule the router uses when applying this service.
Options
rule-name—Identifier for the collection of terms that make up this rule.
The remaining statements are explained separately.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- J Series
- Configuring NAT Rules
- M Series
- Configuring NAT Rules
- MX Series
- Configuring NAT Rules
- T Series
- Configuring NAT Rules
Published: 2011-11-02
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
