Technical Documentation
New
bandwidth
Syntax
bandwidth (bandwidth | ctnumber bandwidth);
Hierarchy Level
[edit logical-systems logical-system-name protocols l2circuit neighbor address interface interface-name],[edit protocols l2circuit neighbor address interface interface-name]
Release Information
Statement introduced before Junos OS Release 7.4.
Description
Specify bandwidth allocation for a Layer 2 circuit or for the class types of a Layer 2 circuit.
Options
bandwidth—Configure the bandwidth in bits per second for the Layer 2 circuit. You cannot configure the bandwidth for the Layer 2 circuit and for the class types at the same time.
ctnumber bandwidth—Configure the bandwidth in bits per second for a class type on the Layer 2 circuit. You can configure bandwidth for up to four class types (ct0, ct1, ct2, ct3) per Layer 2 circuit. If you configure the class types, you must configure them in order, starting with class type ct0.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Published: 2011-10-25
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
