displaylog

Syntax

displaylog -T system:mm[x] <-a> <-date date-filter> <-sev severity-filter> <-src source-filter>

Release Information

Command supported by Junos OS Release 9.1 and later.

Description

(JCS management module CLI) Display the JCS management module event log entries.

Options

-T system:mm[x]—Specify the management module as the target of the command. Replace x with a value of 1 or 2.

-a—(Optional) Display all entries in the JCS management module event log. By default, the displaylog command displays only the first five entries in the log.

-date date-filter—(Optional) Display all entries in the JCS management module event log that meet the date filter criteria. Replace date-filter with a list of dates in mm/dd/yy format. Use the pipe symbol (|) to separate dates in the list. For example, specify the a -date 03/17/2008|03/18/2008 filter to show all events in the log that occurred on March 17, 2008 and March 18, 2008.

-sev severity-filter—(Optional) Display all entries in the JCS management module event log that meet the severity filter criteria. Replace severity-filter with a list of severities. Use the pipe symbol (|) to separate severities in the list. Severities you can specify include:

• I—information
• E—error
• W—warning

For example, you can specify a -sev E|W filter to show all error and warning events in the log.

-src source-filter—(Optional) Display all entries in the JCS management module event log that meet the source filter criteria. Replace source-filter with a list of event sources. Use the pipe symbol (|) to separate sources in the list. Sources you can specify include:

• blade_x—Routing Engine (blade). Replace x with a value of 01 through 12.
• blower-x—JCS fan (blower). Replace x with a value of 1 through 4.
• mm_x—JCS management module. Replace x with a value of 1 or 2.
• mt_x—JCS media tray. Replace x with a value of 1 or 2.
• power_x—JCS power supply. Replace x with a value of 1 through 4.
• switch_x—JCS switch module. Replace x with a value of 1 or 2.

Required Privilege Level

supervisor

List of Sample Output

Output Fields

Table 1 lists the output fields for the displaylog command. Output fields are listed in the approximate order in which they appear.

Sample Output

1 I Audit    01/28/08 19:47:01  Remote logoff successful for user 'kmarkham' 
2 I Blade_03 01/27/08 19:46:14 (bcgcpu3) Blade reboot
3 I SERVPROC 01/27/08 19:45:57 Login ID:''USERID' CLI telnet authenticated. 
4 E SERVPROC 01/27/08 19:42:58 Failure reading I2C device. Check bus 4. 
5 I SERVPROC 01/27/08 19:41:54 Login ID:''USERID' from WEB browser.
6 E SERVPROC 01/27/08 19:41:53 Blower 2 Fault Multiple blower failures. 
7 E SERVPROC 01/27/08 19:41:53 Blower 1 Fault Single blower failure. 
8 I SERVPROC 01/27/08 19:41:48 Ethernet[1] Link Established at 100Mb.
9 I SERVPROC 01/27/08 19:41:48 Ethernet[1] configured to do 100Mb/Full Duplex. 
10 I SERVPROC 01/27/08 19:41:48 Ethernet[1] MAC Address: 0x00-09-6B-CA-0C-81 
11 I SERVPROC 01/27/08 19:41:48 Ethernet[0] Link Established at 100Mb. 
12 I SERVPROC 01/27/08 19:41:48 Ethernet[0] configured to do Auto Speed/Auto. 
13 I SERVPROC 01/27/08 19:41:48 Ethernet[0] MAC Address: 0x00-09-6B-CA-0C-80 
14 I SERVPROC 01/27/08 19:41:48 Management Module Network Initialization. 
15 I SERVPROC 01/27/08 19:41:46 ENET[1] IP-Cfg:HstName=MM00096BCA0C81.

1 E SERVPROC 01/27/08 19:42:58 Failure reading I2C device. Check bus 4. 
2 E SERVPROC 01/27/08 19:41:53 Blower 2 Fault Multiple blower failures. 
3 E SERVPROC 01/27/08 19:41:53 Blower 1 Fault Single blower failure.