Technical Documentation
New
Example: Configuring Static Source Translation with Multiple Prefixes and Address Ranges
The following configuration creates a static pool with an address prefix and an address range and uses static source NAT translation.
[edit services nat]pool p1 {address 30.30.30.252/30;address-range low 20.20.20.1 high 20.20.20.2;}rule r1 {match-direction input;term {from {source-address {10.10.10.252/30;}}then {translated {source-pool p1;translation-type basic-nat44;}}}}
Published: 2011-11-02
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
