Same as gracefully.

(Optional) Restart the configuration management process that manages the configuration for stateful firewall, Network Address Translation (NAT), intrusion detection services (IDS), and IP Security (IPsec) services on the Adaptive Services PIC.

(TX Matrix and TX Matrix Plus routers only) (Optional) Restart the software process on all chassis.

(TX Matrix and TX Matrix Plus routers only) (Optional) For a TX Matrix router, restart the software process on all T640 routers connected to the TX Matrix router. For a TX Matrix Plus router, restart the software process on all T1600 routers connected to the TX Matrix Plus router.

(TX Matrix Plus routers only) (Optional) For a TX Matrix Plus router, restart the software processes for the TX Matrix Plus router (or switch-fabric chassis).

(Optional) Restart the RADIUS accounting process.

(EX Series switch only) (Optional) Restart the autoinstallation process.

(Optional) Restart the chassis management process.

(Optional) Restart the class-of-service (CoS) process, which controls the router's or switch’s CoS configuration.

(EX Series switch only) (Optional) Restart the database replication process.

(J Series router and EX Series switch only) (Optional) Restart the software process for a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server allocates network IP addresses and delivers configuration settings to client hosts without user intervention.

(EX Series switch only) (Optional) Restart the Dynamic Host Configuration Protocol process.

(J Series router only) (Optional) Restart the ISDN dial-out process.

(Optional) Restart the diameter process.

(Optional) Restart disk monitoring, which checks the health of the hard disk drive on the Routing Engine.

(J Series router only) (Optional) Restart the data link switching (DLSw) service.

(EX Series switch only) (Optional) Restart the port-based network access control process.

(Optional) Restart the dynamic flow capture (DFC) process, which controls DFC configurations on Monitoring Services III PICs.

(Optional) Restart the error checking and correcting (ECC) process, which logs ECC parity errors in memory on the Routing Engine.

(EX Series switch only) (Optional) Restart the Ethernet OAM link fault management process.

(EX Series switch only) (Optional) Restart the Ethernet switching process.

(Optional) Restart the event process (eventd).

(Optional) Restart the firewall management process, which manages firewall configuration.

(EX Series switch only) (Optional) Restart the general authentication process.

(Optional) Restart the software process.

(Optional) Immediately restart the software process.

(Optional) Restart the interface process, which controls the router's or switch’s physical interface devices and logical interfaces.

(Optional) Restart the IPsec key management process.

(J Series router only) (Optional) Restart the ISDN signaling process, which initiates ISDN connections.

(Optional) Restart the kernel replication process, which replicates the state of the backup Routing Engine when graceful Routing Engine switchover is configured.

(Optional) Restart the Layer 2 address flooding and learning process.

(Optional) (M10, M10i, and M7i routers only) Restart the Layer 2 Tunneling Protocol (L2TP) process, which establishes L2TP tunnels and Point-to-Point Protocol (PPP) sessions through L2TP tunnels.

(Optional) Restart the Link Aggregation Control Protocol process.

(TX Matrix and TX Matrix Plus routers only) (Optional) For a TX Matrix router, restart the software process for a specific T640 router that is connected to the TX Matrix router. For a TX Matrix Plus router, restart the software process for a specific T1600 router that is connected to the TX Matrix Plus router. Replace number with a value from 0 through 3.

(EX Series switch only) (Optional) Restart the feature license management process.

(TX Matrix and TX Matrix Plus routers and EX Series switches only) (Optional) Restart the Link Management Protocol (LMP) process, which establishes and maintains LMP control channels.

(EX Series switch only) (Optional) Restart the Link Layer Discovery Protocol process.

(Optional) Restart the Management Information Base (MIB) II process, which provides the router's MIB II agent.

(EX Series switch only) (Optional) Restart the service for NFS mounts requests.

(EX Series switch only) (Optional) Restart the multicast snooping process.

(J Series router only) (Optional) Restart the network access process, which provides the router's Challenge Handshake Authentication Protocol (CHAP) authentication service.

(Optional) Restart the pgcpd service process running on the Routing Engine. This option does not restart pgcpd processes running on mobile station PICs. To restart pgcpd processes running on mobile station PICs, use the services pgcp gateway option.

(Optional) Restart the process that implements the Pragmatic General Multicast (PGM) protocol for assisting in the reliable delivery of multicast packets.

(Optional) Restart the logging process for some PICs. With this process, also known as fsad (the file system access daemon), PICs send special logging information to the Routing Engine for archiving on the hard disk.

(Optional) Restart the Point-to-Point Protocol (PPP) process.

(Optional) Restart the Point-to-Point Protocol over Ethernet (PPPoE) process.

(Optional) Restart the Protected System Domain (PSD) process.

(Optional) Restart the ASP redundancy process.

(Optional) Restart the remote operations process, which provides the ping and traceroute MIBs.

(Optional) Restart the Root System Domain (RSD) service.

(EX Series switch only) (Optional) Restart the routing protocol process.

(Optional) Restart the routing protocol process, which controls the routing protocols that run on the router or switch and maintains the routing tables. Optionally, restart the routing protocol process for the specified logical system only.

(Optional) Restart the sampling process, which performs packet sampling and cflowd export.

(TX Matrix routers only) Restart the software process on the TX Matrix router (or switch-card chassis).

(EX Series switch only) (Optional) Restart the secure Neighbor Discovery Protocol process.

(TX Matrix Plus routers only) Restart the software process on the TX Matrix Plus router (or switch-fabric chassis). Replace number with 0.

(Optional) Restart the service deployment service process.

(Optional) Restart the pgcpd process for a specific BGF running on an MS-PIC. This option does not restart the pgcpd process running on the Routing Engine. To restart the pgcpd process on the Routing Engine, use the pgcp-service option.

(EX Series switch only) (Optional) Restart the flow sampling (sFlow technology) process.

(Optional) Restart the SNMP process, which provides the router's or switch’s SNMP master agent.

(Optional) Reread and reactivate the configuration without completely restarting the software processes. For example, BGP peers stay up and the routing table stays constant. Omitting this option results in a graceful restart of the software process.

(J Series router only) (Optional) Restart the USB control process.

(EX Series switch only) (Optional) Restart the Virtual Router Redundancy Protocol process.

(J Series router and EX Series switch only) (Optional) Restart the Web management process.