LN1000 Mobile Secure Router Overview
Configuring a Gigabit Ethernet Interface
Location-Based IP Address Pools Overview
PPPoE Overview for Mobile Secure Router
PPPoE-Based Radio-to-Router Protocols Overview
Credit Flow Control for PPPoE
R2CP Radio-to-Router Protocol Overview
Installing the Software
Setting Non-Volatile Memory Read-Only
Installing Software Upgrades from the Network
Configuring the Software
Swapping Small Form-factor Pluggable (SFP) Devices
Configuring Location-Based IP Address Pools
Configuring PPPoE Interfaces on the LN1000 Router
Configuring PPPoE-Based Radio-to-Router Protocols
Setting Tracing Options for PPPoE
Configuring the R2CP Radio-to-Router Protocol
Example: Configuring a Location-Based IP Address Pool
Example: PPPoE Server Configuration
Example: PPPoE Credit-Based Flow Control Configuration
Example: R2CP Radio-to-Router Configuration
address
address-assignment
apply-groups
bandwidth
credit
data-rate
disable
family
hub-assist
interface
interval
latency
location
location-pool
location-pool-address
mac-mode
node-terminate-count
node-terminate-interval
quality
r2cp
radio
radio-interface
radio-router
resource
server-port
session-terminate-count
session-terminate-interval
threshold
traceoptions
virtual-channel-group
[edit access address-assignment location-pool] Hierarchy Level
[edit interfaces gigether-options] Hierarchy Level
[edit interfaces unit family inet location-pool-address] Hierarchy Level
[edit interfaces unit radio-router] Hierarchy Level
[edit protocols r2cp] Hierarchy Level
Verifying and Managing Location-Based IP Address Pools
Displaying Statistics for PPPoE
Verifying PPPoE Interfaces
Verifying a PPPoE Configuration
Verifying Credit-Flow Control
Verifying R2CP Interfaces
http://kb.juniper.net/
