family
Syntax
- family family {
-
- accounting {
- destination-class-usage;
-
- source-class-usage {
- direction;
- }
- }
-
- address address {
- destination address;
- }
- bundle interface-name;
-
- filter {
- dialer filter-name;
- input filter-name;
- output filter-name;
- group filter-group-number;
- }
- interface-mode (access
| trunk);
- ipsec-sa sa-name;
- keep-address-and-control;
-
- llc2 {
- ack-delay-time time;
- ack-max count;
- idle-time time;
- local-window count;
- max-retry count;
- p-bit-timeout time;
-
- redundancy-group group-number {
- advertise-interval seconds;
-
- preempt hold-time seconds;
- no-preempt;
- priority priority;
-
- track {
-
- dlsw {
- peer ip-address priority-cost priority;
- destination mac-address priority-cost priority;
- }
- interface interface-name priority-cost priority;
- }
- }
- t1-time time;
- t2-time time;
- trej-time time;
- }
- mac-validate (loose
| strict);
- mtu bytes;
- multicast-only;
- negotiate-address;
- no-redirects:
-
- policer {
- arp policer-template-name;
- input policer-template-name;
- output policer-template-name;
- }
- primary;
- protocols [inet
iso mpls];
- proxy inet-address address;
- receive-options-packets;
- receive-ttl-exceeded;
- remote (inet-address address | mac-address address);
- rpf-check <fail-filter filter-name>;
-
- sampling {
- direction;
- }
-
- service (Logical Interfaces) {
-
- input {
- service-set service-set-name <service-filter filter-name>;
- post-service-filter filter-name;
- }
-
- output {
- service-set service-set-name <service-filter filter-name>;
- }
- }
- (translate-discard-eligible | no-translate-discard-eligible);
- (translate-fecn-and-becn | no-translate-fecn-and-becn);
- vlan-id number;
- vlan-id-list (Interface in Bridge Domain) [number number-number];
- unnumbered-address interface-name destination address destination-profile profile-name;
-
- address address {
- arp ip-address (mac | multicast-mac) mac-address <publish>;
- broadcast address;
- destination address;
- destination-profile name;
- eui-64;
- multipoint-destination address dlci dlci-identifier;
-
- multipoint-destination address {
- epd-threshold cells;
- inverse-arp;
-
- oam-liveness {
- up-count cells;
- down-count cells;
- }
- oam-period (disable
| seconds);
-
- shaping {
- (cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);
- queue-length number;
- }
- vci vpi-identifier.vci-identifier;
- }
- primary;
- preferred;
-
- (vrrp-group | vrrp-inet6-group) group-number {
- (accept-data | no-accept-data);
- advertise-interval seconds;
- authentication-type authentication;
- authentication-key key;
- fast-interval milliseconds;
-
- (preempt | no-preempt) {
- hold-time seconds;
- }
- priority-number number;
-
- track {
- priority-cost seconds;
-
- priority-hold-time interface-name {
- interface priority;
-
- bandwidth-threshold bits-per-second {
- priority;
- }
- }
- route ip-address/mask routing-instance instance-name priority-cost cost;
- }
- virtual-address [ addresses ];
- }
- }
- }
Hierarchy Level
Release Information
Statement introduced before JUNOS Release 7.4.
Description
Configure protocol family information for the logical interface.
Options
-
family—Protocol family:
- any—Protocol-independent family used for Layer 2 packet filtering
- bridge—(M Series and T Series routers only) Configure only when the physical interface is configured with ethernet-bridge type encapsulation or when the logical interface is configured with vlan-bridge type encapsulation
- ccc—Circuit cross-connect protocol suite
- inet—Internet Protocol version 4 suite
- inet6—Internet Protocol version 6 suite
- iso—International Organization for Standardization Open Systems Interconnection (ISO OSI) protocol suite
- mlfr-end-to-end—Multilink Frame Relay FRF.15
- mlfr-uni-nni—Multilink Frame Relay FRF.16
- multilink-ppp—Multilink Point-to-Point Protocol
- mpls—Multiprotocol Label Switching (MPLS)
- tcc—Translational cross-connect protocol suite
- tnp—Trivial Network Protocol
- vpls—(M Series and T Series routers only)
Virtual private LAN service
The remaining statements are explained separately.
Usage Guidelines
See Configuring the Protocol Family, Example: Configuring E-LINE and E-LAN Services for a PBB Network on MX Series Routers, and the JUNOS Services Interfaces Configuration Guide.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.

