[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

show lldp

Syntax


            
               show lldp 
               <detail>

Release Information

Command introduced in JUNOS Release 9.6.

Description

On MX Series routers, display information about the Link Layer Discovery Protocol (LLDP).

Options

detail — (Optional) Display the detailed output level.

Required Privilege Level

view

List of Sample Output

show lldp
show lldp detail

Output Fields

Table 82 describes the output fields for the show lldp command. Output fields are listed in the approximate order in which they appear.

Table 82: show lldp Output Fields

Field Name	Field Description
LLDP	Status of LLDP: Enabled or Disabled.
Advertisement interval	Value of the advertisement interval parameter.
Transmit delay	Value of the transmit delay parameter.
Hold timer	Value of the hold timer parameter.
Notification interval	Value of the notification interval parameter.
Config Trap Interval	Value of the configuration trap parameter.
Connection Hold timer	Value of the connection hold timer parameter.
Interface	List of LLDP interfaces, showing status (Enabled or Disabled) and Neighbor count (detail only).
LLDP basic TLVs supported	List of basic LLDP TLVs supported by this device (detail only).
LLDP 802 TLVs supported	List of IEEE 802.1 LLDP TLVs supported by this device (detail only).

Sample Output

show lldp

user@host> show lldp

LLDP                   : Enabled
Advertisement interval : 30 Second(s)
Transmit delay         : 2 Second(s)
Hold timer             : 4 Second(s)
Notification interval  : 30 Second(s)
Config Trap Interval   : 300 Second(s)
Connection Hold timer  : 60 Second(s)

Interface      LLDP     
ge-0/0/0       Enabled         
ge-0/0/1       Enabled         
ge-0/0/4       Enabled

Sample Output

show lldp detail

user@host> show lldp detail

LLDP                   : Enabled
Advertisement interval : 30 Second(s)
Transmit delay         : 2 Second(s)
Hold timer             : 4 Second(s)
Notification interval  : 30 Second(s)
Config Trap Interval   : 300 Second(s)
Connection Hold timer  : 60 Second(s)

Interface      LLDP       Neighbor count
ge-0/0/0       Enabled    0         
ge-0/0/1       Enabled    0         
ge-0/0/4       Enabled    0    

    
LLDP basic TLVs supported: 
Chassis identifier, Port identifier, Port description, System name, System description, System capabilities, Management address.

LLDP 802 TLVs supported: 
Link aggregation, Maximum frame size, MAC/PHY Configuration/Status, Port VLAN ID, Port VLAN name.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]